FreeStanding Lace Embroidery

It’s been awhile since I’ve done any freestanding lace. A friend recently gave me a few spools of white Isacord thread and so what else would I do with it?

I immediately purchased a few designs from OESD. Collection 12724 was perfect for what I had in mind.

When you are working on freestanding lace, you’ll want to use 2 layers of wash-away stabilizer.  I used AquaMesh from OESD. Not to be confused with Aquamesh PLUS, which is also a wash-away stabilizer, but has paper, almost like contact paper on one side, so the stabilizer is sticky.  You’d use that on towels or something where you want the stabilizer to disappear, but don’t want to hoop your fabric.

A quick look at the machine in action:

Now comes the finished product.

Once the design is complete, remove it from the hoop, trim away as much excess stabilizer as possible, then rinse it in warm water until the stabilizer has dissolved.

Next, pin it down to a piece of styrofoam or floral foam.  Cardboard will work as well, but it will get a little soggy. I invested in this piece of styrofoam years ago in the floral department of a Michael’s, JoAnn’s or Hobby Lobby. I don’t remember where. The point is that it will last for years.

When you pin, feel free to use all those pins that are bent or just not perfect for quilting or intricate sewing. These pins don’t matter much, they just have to hold the design in place. It WILL curl and stick up in strange places if you skip this step. Overnight is usually the perfect amount of time for a design to dry completely.

machine embroideryIt’s a perfect accent to a delicate teacup or a small jewel box.

I have been working on a larger project and I planned it out in Bernina Software 8. It requires a few of the pieces repeated and arranged and sewn together. I don’t know how it will look when it’s done, but I’m envisioning that it will make a nice centerpiece on a round table with a festive color underneath. It’s about 18 inches across. (It’s over half a million stitches, so…yeah, we’ll see.)

Freestanding lace, Bernina Software 8

For some of my previous postings on freestanding lace, you can click here.

And here.

Leave a Reply

Your email address will not be published. Required fields are marked *