Meditation Bowl

bowl1These bowls are enough to drive you sane.

With a little bit of practice, you can make these and they are useful, visually pleasing and mesmerizing to sew.

bowl2I start with 20 yards of cotton cording (generally found in the uphostery section).  Traditionally, folks used cording like this as large piping or for drapery –home dec. sewing.

This particular cording, because it is all cotton is very soft, not rigid, like clothesline cord.

I used King Tut all-cotton variegated thread from Superior in both the top and bobbin.

bowl3

 

Be sure to have more than 1 spool available. You go through quite a bit of thread.  Set your machine to a nice wide zigzag…enough to cross over both sides of the cording.

bowl4Start in the center of the bowl and simply sew the cording together.  Keep the cording to your right so you can feed it into the machine.

bowl5The bottom section of your bowl stays flat.  As you progress, gently lift the side of the flat disk and continue sewing.  This begins to form a shape.

Crazily, uncharacteristically, the sewing begins to feel like sculpture, like pottery.  This is where the meditation kicks in.

bowl6You continue to sew at a relatively slow speed, always keeping your eye on the two cords.  Is the zigzag always straight down the middle between the two?

You’ll be tempted to keep sewing while you glance away at the cording to see how much you have left. Don’t.

Stop sewing if you need to, but don’t take your eyes off the needle. Guarantee you will slip off track.

bowl7The beauty of the process is that if you keep going, you’ll ascend to a higher place.  You”ll become a part of the hum, a part of the cording.  Your hands will follow the movements automatically and you’ll feel the flow.

Your mind will calm and focus on just about 1 inch of space on the earth.

bowl8And when you are done, you will have created something very peaceful, very zen.

And it will be more than just a bowl. It will be the place where you put your effort for a while, and the time when you let your racing thoughts evaporate.

Namaste, friends.

 

Slow But Steady…Maybe Just Slow

Finally, between all the end-of-summer commotion and back to school and bus rides and new schedules and coordination, I found a few moments to sew.

I wanted to get back to the Polka Dot Tree project, which has been sitting on my machine for, I don’t know, months now.

I continued outlining the branches, using the triple blanket stitch. This is such a common stitch but is a little trickier to use than a simple blanket stitch.  However, for my purposes, it stands out on the tree and branches so much better and has the look of hand stitching.

bernina triple blanket stitchThroughout the project, I had the dual feed engaged and used a number 20 foot so that I could see exactly where I was going.

polkadot tree2With the branches done, it looks a little more like a Halloween project than I was hoping.

However, after positioning some of the leaves, I got a better feel for the direction this project is headed. I guess that’s the beauty of designing and creating my own projects.

I have no idea how something is going to turn out til after it’s done.

polkadot tree1With the polka dot leaves laid out, I am liking the patchwork/scrappy thing that’s happening.  I am planning (at least at this point) to do some hand embroidery and hand stitching on the leaves, adding in some wools for dimension.  You can just get a hint of some of the fabulous wools in the upper left-hand corner of the shot.

I won’t be able to start quilting til after all of that is complete.

Since the fabric on this quilt came from 60 different people around the world in a polka dot fabric exchange, the idea of being united is important to me. I am toying with the concept of adding a machine embroidery quote along the bottom. We’ll see. Ideas are easy. Implementation takes a little time.

Multi-hooping Challenge, Part 2

The hardest part is done.

It’s not perfect, I realize that.  I would do many things differently if I were to do this project over again.

I still want to add a couple more borders and then quilt it.  I want it to be ready by the time I teach a multi-hooping class Aug 23.

Some tips on multi-hooping in machine embroidery:

–Start small.  2 hoopings would be great.

–Use light airy designs.

–The fewer colors the easier it is to follow.

–If you have a machine that has “perfect positioning,” rely heavily on that.

–Grid your fabric before starting so you know what is absolute horizontal and vertical.

–Practice, practice, practice!

I always tell my students that if you’re not making any mistakes, you’re probably not learning anything new. Mistakes, errors, booboo’s and unstitching are the hallmark of a learning curve. Ask me how I know.

Rare is the person who sits down and implements something new perfectly.  And if they did, they probably didn’t try something challenging enough.

So get out there and push the envelope!  Waste a little thread and a little fabric and a little time! (We both know it’s not really wasted, right?)

Who knows what you’ll be able to create once you move past the fear.

multihooping1

In Over My Head…As Usual

Silly me.

I thought I would try multi-hooping in machine embroidery.

But I didn’t start with a simple design that might require 2 hoopings. No. Not me.

I didn’t even start with a design (as recommended by Amanda from Bernina) with 3 hoopings. Nope.

My design requires 14 separate hoopings. What could go wrong?

multi3The truth is, it’s a pretty nice design.  I used some of the Sepia Petals collection, resized them, wreathed, mirrored and aligned them.

The effect is lovely.  But the design is upwards of 157,000 stitches and measures about 2 ft. by 2 1/2 ft.

 

multi2I used the hoop canvas in Embroidery Software 7.  When I went to save, it asked me this question:  Would you like the export to split the files-one file for every hooping–SHOW ME first.

The SHOW ME turned out to be the most critical part of the design.  It displays a map of every hooping, in relation to every other hooping.

I am only 7 hoopings into this.

multi4Needless to say, after about 2 hoopings I was about to abandon the whole project.  The registration marks were pulling out.  Nothing was lining up properly.  But after about the third hooping I began to get better at facing the challenge.

I relied more on the precise positioning on the machine to help me line things up.

I got good at keeping the software open and showing the view of the hooping that I was stitching (was this number 6 or number 7??)  Anyway, at this point I managed to get the second half of the tree stitched…not yet shown in the pic below, and I am starting to see the light at the end of the tunnel.

multi1

This pic is obviously a work in progress and I don’t have a final to show you yet.  I am planning on adding some coordinating fabric and quilting before I am finished.  But at least you can see where it’s headed.

Remember, its about a 2 ft. x 2 1/2 ft. design when completed. It hasn’t been pressed in about 3 hoopings.  But I think I can make it work. What a learning opportunity this has been!

Stay calm and keep stitching. Amen to that.

I’ll share when it’s done.

 

Bernina University 2014

I just got back from Bernina’s annual conference with dealers across the nation.  I’d like to share with you some of the experience, as it was held at Nashville’s Opryland resort…a tropical paradise in the south!

A few highlights:

–New 97 and 97D foot for 1/4 in. piecing on 9mm machines (that would be the 7series and 8 series, 560, 580).  Allows the foot to ride over both feed dogs giving us more control and a more precise seam.  This is available RIGHT NOW!  So get your orders in to your dealers.  If you are a quilter, this sounds like the foot for you!

–New Sterling Edition 880 that comes with DesignWorks and a GORGEOUS quilt design from Sarah Vedeler.

–New Swiss Edition 530 (hint:it’s red)

–New pink Bernettes that give a portion of proceeds to Breast Cancer research.

–The long-awaited 24 in and 20 in. longarms are here.  These machines are fantastic, but the rollout will be staggered starting in Q4 in limited markets.  They are manufactured in Switzerland 1 person, 1machine….means that one man (or woman) will assemble the entire longarm sewing machine before moving on to the next.  No assembly line production!! And let me tell you–these machines are awesome! Stitch regulator is included, takes all Bernina feet, bobbin winder up front and accessible, as well as your threads….I was really impressed by these machines.  The 24″ comes with a frame, the 20″ can be tabletop or frame.

So much more from Brewer and OESD coming up this fall as well.

Here’s a link to a fabulous youtube video from Heirloom Creations that does a great job of displaying the new machines from BU 2014. 

The view from some of my classes and wanderings:

 

Fresh Projects and Fresh Strawberries

software sampler2This is a project I worked on at work and at home for the June Bernina Software Sampler, which I teach.  The project involved learning techniques for machine embroidery applique.  The bud of the flower is part of the tutorial, but I went ahead and incorporated other elements as well, adding the stems, leaves etc. to create a simple but “summery” table runner. Once again, I was inspired by something I saw on Pinterest.

No pattern available, but for those of you with embroidery machines and Bernina Embroidery Software 7, it’s a piece of cake….well, once you work out the dimensions.  The flower panels are 8 x 8 inches finished, and everything else falls into place after that.

(How many pairs of glasses does one sewist need? Hint: At one point I used them both.)

strawberriesOne of my favorite times of the year is when the strawberries are harvested at the local farm. Here’s a shout out to friends at Norton Farm.  They are an important part of our summer!  We’ll be waiting for the tomatoes, broccoli and finally the fabulous corn! I’m growing a few tomatoes and cukes out back, but the weather has been a little cool, so they are taking their time developing.

Here’s to the sweetness of summer!  May we always appreciate the bounty!

strawberries2

 

Baby Steps Toward a Project

I’m getting ready to start working on the polka dot project.  I have an idea about creating a tree with the different polka dots as the leaves.  I am starting as a base fabric some absolutely lovely twill which I ran across on rosie.com, which had an advertising link to Honey Be Good. Honey Be Good sells premium organic cotton.  I’ve only purchased this red twill there so far, but wow, the twill is yummy.  I need some clothes made out of this stuff.

I’ll be adding wool as the trunk of the tree, and I wanted to outline it in white.  I’m never sure how it will all turn out, but that’s the thought right now.

So I experimented on the machine using white perle cotton, size 8, as the blanket stitch thread.

perleAs you can see, the perle has a lot of dimension, jumps off the fabric and generally adds a lot of pop. But size 8 is just too large to go through the tension disks properly.

 

 

 

 

backside  I used a 90/14 needle and reduced the tension somewhat.  But you can see that the back side was looking like it might get knotted and nested at any moment.  Considering the size of this project, I just don’t want to be worrying so much about the  thread.

 

aurifil 28

 

I switched to Aurifil, size 28, and used the triple blanket stitch.  I made the blanket stitch a little wider for visibility, since the thread is so much finer.  Aside from having a more “machine-stitched” look, it does the job with the same “eyeball impact”.

 

finalSo here’s where I’m eventually headed.  I will be using much larger pieces of wool on the twill, with the white blanket stitch around it.  Eventually the whole project will be machine quilted, but not until I get all the details that I want.

I urge you to really experiment with your machine and some of the thicker threads.  You can get a hand-stitched look, and even when it does not look quite as hand-stitched, you can certainly add texture, dimension and detail to your project.

Be bold.  Nobody is writing the rules.

Save yourself — from Pinterest

If only I could.  But every now and then I get sucked into it.

If you sew, you know just how many absolutely gorgeous fabulous creative bright shiny fresh interesting lovely stunning fabric-savvy darling sweet edgy smart…whew…IDEAS are on that site.

I am helpless to resist.

So this little t-shirt project was inspired by one of the ideas I saw there at some point, and I wish I could credit the original poster.  But that’s the thing about pinterest.  You click on something, then on another thing, and before you know it you are down the rabbit hole somewhere on a blog, mixing all the ideas together.

So, for the record, I bought several of these cheap tees to use at a class for embroidery positioning.  The students used them in the class and now I have them left over and I was wondering what else I could do with them. Here’s the upcycle idea:

Before.

Before.

After.

After.

 

 

Just a plain tee to start, but it gets cut up into a shrug-type garment.

 

 

 

 

In the summer, I think it will look cute over a tank or tee.  Not bad for the $5 or so that I paid for it.

In the meantime, I’ll be shielding my eyes from the inevitable lure of pinterest.

For the moment.

Second Half of the Polka Dot Fabric Arrived!

Your fabric should either be her or in the precious post!  All polka dot exchange fabric is shown...60 squares!

Your fabric should either be here or in the previous post! All polka dot exchange fabric has arrived…60 squares!

Well, the second half of the fabric has arrived, and I spent the morning pouring over the notes, and fabric and addresses (just to see where everything came from).  This whole event has been a fabulous experience…and I haven’t even started to work with the fabric!

Vilbert, Germany. Wisconsin. California. Illinois. Derry, Ireland. Canberra, Australia.

Then, of course, was the fabric square from Edyta Sitar, from Laundry Basket Quilts, who also participated and did a lot of promoting of the exchange on her blog.

edyta sitarAt this point, I have an idea of what I want to create with all of the polka dot fabric, but I need to work out exactly what I’m going to do…I’ll keep you posted.

Many thanks to everyone who participated and to Prairie Stitches for coordinating.  This has been a terrific experience and I hope we can inspire one another to great things with all of our polka dot creations!